Address
Vytenio g. 6-12,
Vilnius, Lithuania
Phone
+370 686 83 633
Item no. EH-10112 CO Alarm
Euroheater CO-Alarm is designed for continuous monitoring of carbon monoxide (CO). The alarm registers both CO concentration and exposure time and warns with sound and red flashing light when alarm limits are reached. Developed and manufactured in Norway for reliable CO warning.
> 200 ppm: Alarm at 10 sec. exposure
Mounting: 1.5–2 m above floor
Startup time : 30 sec.
Description
Description
Euroheater CO alarms
Euroheater CO-Alarm is designed for continuous monitoring of carbon monoxide (CO). The alarm registers both CO concentration and exposure time and alerts with sound and a red flashing light when alarm limits are reached.
The device activates automatically when the battery is inserted. The LED indicator shows operating and battery status, and in case of low battery voltage the user is notified with a yellow flash and an audible signal.
Alert based on CO level and exposure time
CO-Alarm continuously monitors the concentration and reacts more quickly to high CO levels. In the event of an alarm, the device alerts with a red flashing light and an audible signal.
The alarm sound can be silenced with the button if the CO concentration is below 300 ppm. The LED warning remains active as long as the CO level is elevated. If the concentration is still above 50 ppm, the alarm sound is automatically activated again after 15 minutes.
The alarm is activated when the following limits are exceeded:
| CO concentration | Average time |
|---|---|
| > 200 ppm | 10 seconds |
| > 150 ppm | 1 minute |
| > 125 ppm | 3 minutes |
| > 100 ppm | 10 minutes |
| > 75 ppm | 12 minutes |
| > 50 ppm | 60 minutes |
Assembly
The CO alarm should be mounted 1.5–2 meters above the floor and attached with double-sided tape or other suitable mounting material.
Technical specifications
| Detection | Carbon monoxide (CO) |
| Unit of measurement | ppm |
| Alarm | Sound signal and red flashing LED light |
| Normal operation | Green flash every 60 seconds |
| Low battery | Yellow flash + beep every 60 seconds |
| Startup time | 30 seconds |
| Alarm silencing | Yes, at CO < 300 ppm |
| Reactivating the alarm sound | After 15 min. if CO > 50 ppm |
| Assembly | 1.5–2 m above floor |
| Activation | Automatically when battery is inserted |
| Reference | 211-JE 405 094 |
| Standard | EN 50291-1* |
| Dimensions (L x W x H) | 60 × 60 × 27mm |
| Weight | 55 kg |
| Origin | Developed and produced in Norway |
Featured products
Here you will find a selection of products that are compatible with CO-Alarm - press the button to see the full range.
Contact if interested
Contact us for pricing, delivery times and customized solutions for your organization.
